• cmnybo@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      5
      ·
      10 hours ago

      The data is burned into a piece of glass with a laser. It doesn’t use a dye to store data like a CD-R. I doubt bit rot would be much of an issue. With that much capacity, you could use lots of forward error correction though.

    • gnate@lemmy.world
      link
      fedilink
      English
      arrow-up
      13
      ·
      16 hours ago

      What form would that take? They seem to indicate lifetime on the centuries, similar to expectations for M-DISC.

      • MalReynolds@slrpnk.net
        link
        fedilink
        English
        arrow-up
        11
        arrow-down
        1
        ·
        15 hours ago

        Gonna guess glass deformation over time is going to come into play (really (like millennia) old windows get thicker at the bottom), probably why the quartz version of this is speculated to be good for millions of years. And of course breakage. The drives will fail first.

        Sucks to be Microslop sitting on this for years and years and China comes along and eats your lunch. Ha Ha.

        Hopefully a story soon to be repeated with RAM and then chips, about time there was real competition and innovation in this space, too many cartels due to high capex siloing. This looks more like CDs, could be everywhere in a few years.

          • MalReynolds@slrpnk.net
            link
            fedilink
            English
            arrow-up
            2
            arrow-down
            1
            ·
            11 hours ago

            Yeah, I’ve heard that and I’ve seen pictures of examples, dunno. Personally, anything beyond a century is irrelevant anyway.

            • Sneezycat@sopuli.xyz
              cake
              link
              fedilink
              arrow-up
              7
              ·
              8 hours ago

              The window panes were cut from irregular sheets, and they were simply installed with the thicker part at the bottom, for structural integrity.

              It was a manufacturing quirk.

      • Truscape@lemmy.blahaj.zone
        link
        fedilink
        arrow-up
        5
        ·
        14 hours ago

        Like the other user mentioned, glass warping/deformation. Although I’d reckon kinetic impacts, tremors, or actual drive failure would occur first (the real question is what are the maximum tolerances before a read/write fails or ends in data corruption).