We talk a lot about enshittification of technology, so tell me about technology that is getting better!
I personally love the progress of electric scooters. I’ve been zooming around on a 400$ escooter for a year and it works so well. It has a range of around 20 miles and top speed of 15 mph, so it works just super well for my uses, and 10 years ago scooters with that range/speed/price were no where near a thing.
You must log in or register to comment.
Open source software in general. Seeing Blender become an industry standard was awesome, and it looks like the Godot engine may do the same for gaming. Krita has evolved into a truly wonderful painting program (and not half bad as a Photoshop replacement), and Linux itself has come so far, having become a genuine gaming platform.
Quite happy about all of that. :)
I love Krita, it’s my go-to layered image editor unless I need to do something more fancy
Active noise cancellation. It’s a bit like magic. Don’t be a wanker and say “Um actually, all you have to do is emit an inverse waveform.” I think it took a hell of a lot of work to get this right, especially integrating it into relatively inexpensive consumer devices. Thanks, scientists and engineers. Well done.
I think the concept was old and fully grasped. Reducing the latency enough to make it work in headphones and earbuds was the magic part.
This will sound a little mundane but, FLASHLIGHTS! Particularly bicycle head lights. The prices before LED’s were just STUPID. Hundreds of dollars for small amounts of light (which to be fair was the best you could get at the moment). Which were being used for night mountain biking. But all I needed was to get to and from work safely at night, I didnt have $400 for a headlight that would actually let me see the ground in front of me.
BUT, then came the revolution. China started putting out these LED lights that blew everything else out of the water … FOR CHEAP! In two years light prices went from $400 to $100 for top of the line lighting. US bike light companies were a year or two out before they could re-tool to match the lumens coming out of china. Mind you, the Chinese lights were not always the most reliable. BUT they were 1/4th the cost of a name brand light. So even if it died, you could still buy ANOTHER one for less than the price of a high end name brand light.
And since the LED revolution, things have not changed much. Prices either go down or stay the same and the lumens increase OR the burn time increases. Its just a win win for customers/consumers.
By the same token, and I consider these a different category, headlamps. Camping got a whole lot better with a solid headlamp setup. The red light is crucial.
I hadn’t thought of that, but you’re right. When I was growing up, incandescent bulbs and massive short-lived batteries made flashlights suck. Now flashlights are tiny, throw a tonne of light, and last a really long time.
I have an obsession with light. Love the golden and blue hours and I don’t want to know why, it’s just so beautiful to watch. Being like this I’m pretty conscious of lighting and, in general, it has become just wonderful to have that precise dim and warmth in every space for a reasonable price. Not only this, less-intrusive lighting had become something urban ecologists quietly succeeded on spreading all over the world (bat-friendly lighting, for example) thanks to the available technologies.
So, yeah… not mundane at all.
Lights. 15 years ago, everyone was using incandescent bulbs which were terribly inefficient and neon lights which had their own inconveniences. Today, LEDs have mostly replaced them, can produce better quality light, and use a fraction of the power.
Agreed. I remember when lightbulbs got banned here in the EU starting from 2009 to 2012 in steps. Here in Germany plenty of people were mad and hoarding them.
Nowadays with the larger focus on energy prices, especially in light of the russia-ukraine war, it seems insane that not even that long ago to light a room one or multiple lightbulbs using 65-100 watts were used. That’s like the equivalent of an office PC running just for some light.
And they run cool. My office has a fixture that was too bright which would normally take those 4’ fluorescent bulbs.
I got on a ladder take one out. Turns out they were LEDs. Cool to the touch. I put electrical tape over them and called it a day.
Only downside is people abusing the lack of headlight & bumper height regulations
Holy fuck. Have you ever seen one of those full grill panels? Brighter than the god damn death star. When it’s foggy the beam extends 3/4 of a mile
no I’d be dead
Must be a Texas thing
Better stay that way. I like the really lit up Subarus and Kias. Easier to see them on the road instead of making it harder for everyone
I miss real neon. but I like that hydroponic grow-lights now only use as much power as a 60-120watt incandescent bulb. I remember when those big metal hallide & sodium lamp setups were a huge barrier-to-entry for indoor growing.
What do you grow? Carrots, right?
Tomatoes
I’m excited to see the progress of 3d printers becoming more user friendly, reliable and inexpensive. I’ve been keeping an eye on the development of consumer printing and there are so many types of materials to print with at higher and higher details with less troubleshooting needed. I’m thinking I’ll finally jump in this year but I’ve had very little time for hobbies lately.
I’ve been following 3d printing since the early 2000s, when it was all homemade machines printing with weed whacker line, slicers weren’t a thing, and resolution was garbage. Now I have a resin printer that cranks out tiny detailed tabletop miniatures no problem. What a time to be alive.
what model do you have if you don’t mind me asking? curious what’s out there working for people from someone who would like to get into it but just hasn’t (nor looked into it very much)
I’m still using an Creality Ender 3 for FDM because it was cheap and does the job, but a lot of great FDM printers have come out in the past few years at competitive price points. I use this for larger items where fine detail isn’t important (tabletop buildings, terrain, vehicles, large creatures, etc)
For resin I’ve got an Elegoo Mars 3 Pro, but anything 4k is going to give pretty good results. Keep in mind though, resin is more involved than FDM. You’ll need gloves and a VOC respirator to handle fresh prints, and I sprung for the wash/cure station to make my life easier. I use this for small prints with thin parts or fine details (character minis mostly).
FDM is where most people start to get their bearings, but if your use case is exclusively small detailed prints, it may be worth it to jump straight into resin. Just prepare for a slightly steeper learning curve.
E-books
I love having the physical thing in my hands, but love that we’ve gotten to a point where I can log on to Libby and just download one too, or back up digital versions of my favorites on my hard drive so I hopefully never lose them.
Have you checked out using an IRC for e-books?
Nope, but I will.
Medical things, mostly. Everyone experienced the speed that mRNA vaccines can be developed and deployed at scale. A lot is coming from that tech. One of the objectively good uses of AI is protein folding and discovering new compounds. Just being able to target a virus’s weak point is so new, stupid people are freaked out by it.
Consumer tech stuff like batteries and whatever the hype cycle is promoting — crypto or LLMs — gets all the attention but the life sciences field marches on. There are things that are going to revolutionize the way we think about certain diseases. In my lifetime, AIDS went from death sentence to something more like expensive diabetes.
And with emergency care, there are things that even an ER doctor with $200,000 in equipment can only hope to triage today that will be something an EMT can begin to triage on the way to the hospital with something simple. (NARCAN exists now but it’s an example of slow and steady progress. Imagine a NARCAN for heart attack or stroke where we just keep it in our first aid kits.)
I’ve been an EMT for over 15 years. It’s now common place that ambulances carry battery powered devices that do cpr compressions for you. The things are incredible, really. Freeing up a person from needing to do it, no longer worrying about fatigue, and not having an extra person to do compressions in the way of moving around the patient is just fantastic.
Just looked this up and found Lucas.
That looks straight up from Scifi, that is amazing.
The Lucas looks more Sci fi, but usage wise, I prefer one called AutoPulse. It looks less “brutal” when being used in front of patients family/bystanders, isn’t as loud, and the newer ones have a built in tarp with straps to pick up the patient and carry them so the stretcher. Also has a much lower profile.
Ooh watched an AutoPulse one!
AutoPulse looks almost Star Trek. Very sleek and usable. It looks so unassuming when they pull it out, then it makes that chest COMPRESS. I’m aware that you have to press hard enough to get the ribcage moving, but I was not prepared for such an unassuming device to have that much force. I can see them slipping a vest onto someone in star trek that pumps their heart and helps carry them to sick bay.
Lucas is more star wars. It looks like a rib cracker.
So I think I’d prefer an auto pulse XD
Lol. That’s a good take.
Linux is pretty sweet. I haven’t got a new computer in over a decade, and don’t plan to, and this OS just continues to work like a dream.
I may become a Linux boy once windows 10 is EOL.
The enshittification of Windows seems to be accelerating at a crazy rate. Haven’t used linux in like 15 years when I tried using uBuntu, and I’ve heard it’s only grown exponentially better.
I also bounced off of Ubuntu, when it first came out and nowadays it is even more ridiculously simple to I install and start using.
No guarantees that you won’t have to do a bit of research of you’ve got particular hw or sw that you want to use, but as far as a general purpose os it has it all
LED technology has progressed massively and is now at the state where you can carry a device with the lighting power of a car headlamp but it only consumes 10W, weighs 200g and fits in the palm of your hand. I can ride my bike through the woods at night, as if it were daytime. All we need now is some technology that makes the woods less creepy after sundown and we’ll be all set.
Another big one for me is Wikipedia and the information sphere in general. I forgot what it’s like to have to physically go to a library to look something up or learn a new skill, amazing power at our fingertips. Showing my age a bit here.
What else? Computer aided engineering tools, cordless power tools, phones and computers in general, lithium ion batteries, my automated coffee maker kills it, drug technology, I like it all.
cordless power tools
Each tool had their own battery, it discharged so fast and degraded even faster, and forget buying new batteries because the manufacturer decided to change the design again and either you’re stuck with a drill that only works for five minutes or buy a new one.
Now batteries last an eternity, and because each brand has their own ecosystem, as long as you buy tools from the same brand you can use the batteries you already have. And also the brands has no incentive to change the design and break the compatibility of the batteries, it would alienate the costumers who spent a lot of money on the tools and would go for another ecosystem.
Remember when batteries had ‘memory’ and would charge dramatically less over time?
deleted by creator
Open source software in general is getting incredibly complex. While big companies mopolized the software industry at the end of the century, now the most widely used technologies are completely open source (kvm, linux, docker, apache, ssh, c++, rust), which means that everyone has access to it and can use it for personal or light commercial use without too much cost and hassle. Sure, companies still monopolize, but only because they offer hardware and services at a big scale, if you want to have an indipendent space on the internet, this would be the perfect time
I’m a libreoffice user myself and I forget I have the “replacement” most days. The entire suite feels great these days.
I’ll catch downvotes, whatever.
Is there too much hype in the AI space? Yes. Is it still absolutely incredible, the advancements we’ve made since 4chan made gpt2 racist?
We got LLMs that can one-shot code up simple games like snake and minesweeper. I can throw 12 pdfs at a single prompt and ask which of them talks about an idea that might not be explicitly mentioned in any of them and not only can it identify it, it can summarize it and expand on it.
Am I sick of seeing it shoved into everything? Yes. Is it basically magic? Also yes.
Self hosting is pretty great right now. Immich, Tailscale, truenas, docker, vaultwarden - you can solve so many of your own problems with any old computer you have lying around
Battery tech and self-sufficient energy solutions for a home in general. Being able to provide your own energy and store it for later use is just excellent.
Batteries. That’s the next stage in human advancement. Different battery technology
No kidding. Remember when an electric drill took 4 D cell batteries and you could more easily make holes with a screw driver and a bow? Now you can mow your lawn, cut down a tree, and brush your teeth on the same charge
I actually bought an escooter about 10 years ago.
Thing couldn’t get me anywhere.
Oh true! Which is also why my scooter is so powerful for the price.
20 miles on a charge on a device I bought for $400? Absurd.
for real, solid state batteries are going to be a game changer
Storage. SanDisk recently announced an 8TB SD card. I remember back when all I had was 1.44MB floppy disks in like the 90s.
