• Th3D3k0y@lemmy.world
      link
      fedilink
      English
      arrow-up
      26
      ·
      28 days ago

      My wife is starting to get really irritated with me as I begin my recycled jar collection.

      The problem I foresee is that most of my old salsa jar lids will eventually rust and I’m not sure what to replace them with.

      • ryannathans@aussie.zone
        link
        fedilink
        arrow-up
        11
        ·
        28 days ago

        Glass recycles, so you could recycle the jar and replace it

        You could also use beeswax wraps, or a silicone sheet and a tie

        If you need the sterility of a sealed jar, I imagine you’ll just need to replace them over time

        • agamemnonymous@sh.itjust.works
          link
          fedilink
          arrow-up
          11
          arrow-down
          1
          ·
          28 days ago

          Glass recycles

          Not as much as you might think. A lot of places have stopped recycling glass because it’s hazardous and there are huge backlogs of recycled glass. Yes it recycles from a material science perspective, but from a logistics perspective there are issues.

          • ryannathans@aussie.zone
            link
            fedilink
            arrow-up
            10
            ·
            28 days ago

            Over here over 90% of glass put in the recycling is recycled into new glass bottles/jars. The rest of the glass goes into making roads

            You guys having problems recycling glass?

            I struggle to comprehend that the dangers of broken glass haven’t been overcome everywhere

            • agamemnonymous@sh.itjust.works
              link
              fedilink
              arrow-up
              7
              ·
              28 days ago

              You’re lucky, my area stopped recycling glass years ago. Like I said, there’s a huge backlog which makes processing less attractive. Also most recycling seems to be single stream (all recyclables go in one bin and get sorted at the facility), and broken glass contaminates the other recyclables which is dangerous to human sorters and is abrasive to machines.

              I’ve seen a couple pilot programs pulverizing glass for concrete, but as with lots of recycling (looking at you plastic) in most places it’s not as simple as “Just recycle it”. Again, more a logistics issue than a material one.

              • Zarobi@aussie.zone
                link
                fedilink
                English
                arrow-up
                2
                ·
                28 days ago

                I always thought it was extremely silly where I live there is just a “recycling bin”. The lack of specificity makes the problem worse because people get confused what is recyclable. The infamous example is disgusting dirty nappies going in recycle bin because they have plastic in them…

                I’ve also seen family members put dirty plastic wrap / film in recycling, and composite materials like Doritos packets. I’ve tried to explain it but they just don’t get it, it’s too complicated for most people. That’s not saying they’re dumb or anything; it is complicated. That just means we should maybe consider simplifying it.

                I feel like if there was a “glass” bin, most people would only put glass in it. Same with metal (not sure most people could separate aluminium with steel or anything like that).

                • agamemnonymous@sh.itjust.works
                  link
                  fedilink
                  arrow-up
                  3
                  ·
                  28 days ago

                  I’m always jealous when I visit a place which has separate bins for plastic, glass, metal, paper, and compost. I’m seriously considering trying to get on my city’s waste management board to improve our recycling. But we have to live in the environment we have until we can make it into the one we want.

              • Axolotl@feddit.it
                link
                fedilink
                arrow-up
                2
                ·
                27 days ago

                I think it may be an issue in your area, also, where do you live? That’s such a bad way of recycling…

      • herrvogel@lemmy.world
        link
        fedilink
        arrow-up
        5
        ·
        28 days ago

        You replace them new lids. Where I live loose jar lids are sold in packs in practically every supermarket. Really not difficult to find at all.

        • Th3D3k0y@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          27 days ago

          For Mason jars that is fine. My issue is with my Mrs Renfro salsa jars I’ve collected, they are not a standard Mason jar size lid

  • Pupschism@lemmy.world
    link
    fedilink
    arrow-up
    15
    ·
    28 days ago

    In this scenario I would add some dishwasher powder to some hot water and leave it for a while, the enzymes digest the fats and can be much more effective in some circumstances

  • scrodumb@lemmy.ca
    link
    fedilink
    arrow-up
    15
    arrow-down
    2
    ·
    28 days ago

    Have you considered it is not the dish but perhaps your greasy sausage fingers?

    Food for thought.

        • scrodumb@lemmy.ca
          link
          fedilink
          arrow-up
          3
          ·
          28 days ago

          I’ve dunked half my hand in an active deep fryer before. I was 19.

          I knew what I was doing so it was all coordinated, into the oil, grab the item, pivot 180 directly to the sink and cold water for a couple minutes.

          Lightening fast. Barely had first degree burns. Was perfectly functional the next day.

          It’s one of the stupidest things I’ve ever done, I doubt I could ever pull it off again. NEVER TRY THIS.

          Almost 20 years later I have no idea how I walked away from that intact.

  • snoons@lemmy.ca
    link
    fedilink
    English
    arrow-up
    9
    ·
    28 days ago

    Should get glass or metal containers (ore sometimes even ceramic) if you can afford it or if you can sneak them into your bag/inner coat pocket.

    I bought some when I could afford it ~five years ago and they’re still like new.

    …You have to take out the sealing band and wash it separately from the lid. So many containers are ruined because people don’t take out the seals and the grow mouldy. ;-;

  • pomegranatefern@sh.itjust.works
    link
    fedilink
    arrow-up
    9
    ·
    27 days ago

    Plastic is oil-based. It repels water and bonds with oil. Soap does also bond with oil but you’re fighting a much more uphill battle with plastic than with, say, glass or metal. Even with other concerns about plastic aside, if this bothers you, start looking for glass.

  • [object Object]@lemmy.world
    link
    fedilink
    arrow-up
    7
    arrow-down
    1
    ·
    28 days ago

    Pro tip: use an actual soap bar, the one you wash your hands with. Works way better for oils, and particularly specifically on plastic.

    Where I am, there are also soap bars for household tasks, with a shitload of acid in them. Would probably clean oil even better

  • iguessimlemming@lemmy.ml
    link
    fedilink
    arrow-up
    4
    ·
    28 days ago

    Saw a cool trick on IG, bit wasteful but works if you really want to save the container (I agree we should switch away from plastics - someday…). Piece of paper towel or napkin, drop of dish soap, a splash of hot water, close tight and shake thoroughly so the paper goes all around the inside, remove paper, rinse, wash normally.

  • Sam_Bass@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    28 days ago

    its the same taking a bath. after the first swipe, youre wiping with that filth in a steadily increasing amount. the dirt never goes completely away in a tub