- cross-posted to:
- linux@lemmy.ml
- cross-posted to:
- linux@lemmy.ml
You must log in or register to comment.
This reminds me of the e-SATA port that was also a USB port.
eSATA seemed like it had potential but I can’t say I ever actually used it. I remember those ports, though. Might have a motherboard kicking around in storage with one.
I used esata back in the day and I loved it. I had a second hard drive that I could plug into my laptop with all my games on it. This was back when SSDs were $1 per GB on a good day so 120GB SSDs were typical.
And even in the early days of USB 3 external HDDs were slow. It wasn’t until uasp became a thing that they didn’t suck outside of backing up large files.
I actually just bought a PCIe eSATA card to use with a 4 bay HDD enclosure. The ports kinda suck though
eSATAp! What a wild combination.
Not actually a terrible idea, even if it frequently was limited to powering 2.5" drives due to a lack of 12V. Some had extra contacts for that, but most that I saw didn’t.
TIL that is a thing that exists and works!
More or less. Not very robust though.
Can every KVM do this please?
You can make it sooo cursed lol.
A KVM usually have circuitry that can handle a specific total bandwidth and a specific number of HDMI or DP ports (I’ve seen a few where using 2x 4K displays would disable the remaining ports until disconnected due to bandwidth).
To make this work as expected for a KVM you need circuitry to handle all ports being used for either standard (expensive, lol), and have each physical port connected to I/O on both the HDMI and DP controller. Or support half and half, but connect each port to even more I/O ports and start doing switching…
You mean like a $500 level 1 techs KVM?
The obvious difference is the shape of the connector in the port. The DP proper has a little “L” leg on it.
