I wish this was a joke. Bosch used USB Micro-A on some of their e-bike motors to connect to a phone, which is USB C. The only one I’ve been able to find is the one Bosch made that’s like 3 inches long and basically useless.

  • unmagical@lemmy.ml
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    AFAIK There’s not a Micro-A exclusive receptacle. There’s Micro-B and Micro-AB (which accepts both) receptacles though.

    Given that, see if you have a Micro B cable laying around and see if it physically fits in the port, if so just use a Micro-B to Usb-C.

    • SteevyT@beehaw.orgOP
      link
      fedilink
      arrow-up
      3
      ·
      edit-2
      1 year ago

      Holy shit, it actually fits, no clue if the connection is good, I’ll need to find an adapter to go with my test cord.

      Edit: Well, with the A to C adapter I have I cant get the cord to make a connection.

      • unmagical@lemmy.ml
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        I think you’ll probably have a difficult time getting an adapter to work–possibly even a Micro-B to type-C cable.

        Here’s where it gets annoying.

        USB is traditionally directed; you have a host and a client. This was codified in the physical standard until type-C. Type-A ports (and the respective jacks) are intended for hosts while type-B was intended for clients. A usb-C to micro-B cable therefore will be intended to provide power/data from the C side to the B side and in almost every case this will not work in the other direction.

        In your case the battery bank is intended as a host to provide power. You might find a Micro-B to C that works, but it’ll probably be out of spec.

        So why does the Micro-AB port exist? Well the micro part implies your device is mobile. Being mobile might mean you have a battery, and having a battery means you might want to charge it. That means your device can likely operate as a host (to charge your phone) OR a client (to charge your battery) through the same port.

        Since type-C is intended to be fully reversible the type-C port and cable will have wiring to facilitate that. However a Micro-B is intended to be directional and with a fixed orientation so the wiring, even from a type-C jack will facilitate that.

        I wish I’d remembered that before the false hope, but it completely slipped my mind.

        You will probably be able to use a USB-C extender if the only problem is that the original cable is too short. They have some at Walmart for $2 USD.