Yes. A combination of rust, thread cutting oil, and water that has been in the pipes often since the system was filled. It smells, it will stain anything it touches, and it’s a smell that’s difficult to remove.
There are sprinklers where this happens and the sprinklers look exactly the same. There’s a pressure switch on the sprinkler line that activates a deluge pump. This pump has enough pressure and flow capacity to break open the glass ampules of the remaining sprinklers in the circuit.
This happens with fire sprinklers a lot, one sprinkler goes off, and triggers the rest of the floor, or sometimes even building.
That’s not how it works. Each sprinkler has it’s own trigger mechanism, the glass bulb, and cannot trigger another sprinkler.
There are systems where this happens, but the sprinkler heads look very different, and you won’t find them in an office building.
Isn’t the water in sprinkler systems a stagnant mess too?
Yes. A combination of rust, thread cutting oil, and water that has been in the pipes often since the system was filled. It smells, it will stain anything it touches, and it’s a smell that’s difficult to remove.
Once I turned a suspicious faucet I shouldn’t have and got a blast of this in the face.
deleted by creator
That’s to test the incoming main, the actual grid on the floor doesn’t get flushed. There’s a lot of dead end pipes that can’t be flushed.
There are sprinklers where this happens and the sprinklers look exactly the same. There’s a pressure switch on the sprinkler line that activates a deluge pump. This pump has enough pressure and flow capacity to break open the glass ampules of the remaining sprinklers in the circuit.